
Start backup planning by deciding what must keep running, what may run in sequence, and what can wait. Ask Solar Mike uses that household priority list to shape a site-specific Tesla solar and Powerwall 3 design, then has the system design produced and reviewed by a licensed engineering firm .
For Utah homeowners, this approach is more useful than beginning with a battery count. It connects the backup plan to the way the household actually uses HVAC, refrigeration, medical equipment, water systems, communications, lighting, and other electrical loads. See the Utah Tesla Powerwall 3 guide for the broader system-planning context.
Last reviewed: 2026-10-12. Reviewed by Mike Morris, Founder, Ask Solar Mike .
A useful plan begins with one question: during an outage, what does your household need to accomplish?
That question is different from asking which appliances you own. Two homes may contain similar equipment but need different backup priorities. One household may place temperature control first. Another may need continuous support for medical equipment. A third may be comfortable pausing HVAC while preserving refrigeration, lighting, internet equipment, and selected outlets.
This is a planning preference worksheet, not an engineered backup design. Electrical architecture is confirmed through site verification and engineering.
Create one row for every load that matters during an outage. Do not rely only on a general label such as “HVAC” or “medical equipment.” Record enough information for a designer to identify the specific device and how the household expects to use it.
| Planning field | What to record |
|---|---|
| Equipment | The appliance or device name and model, if available |
| Purpose | What the equipment does for the household |
| Priority | Must run, scheduled use, or can wait |
| Timing | Continuous, periodic, overnight, daytime, or only when needed |
| Simultaneous use | Other loads likely to be operating at the same time |
| Electrical information | Voltage and manufacturer nameplate information |
| Existing backup | Any device-level battery or other approved backup already in use |
| Household instructions | Who uses it and what the household will do during an outage |
Photograph each accessible nameplate rather than transcribing it from memory. Include indoor and outdoor HVAC equipment, each refrigeration appliance, and every electrically powered medical device that affects the outage plan.
For medical equipment, also retain the manufacturer’s backup instructions and guidance from the appropriate care provider. A home battery plan should not replace device-specific emergency procedures or an established plan for obtaining urgent help.
Sort the inventory into three practical groups.
Then test the list against realistic household moments. What does the plan look like overnight? What happens when HVAC is requested while refrigeration and a must-run device are operating? Which loads can be paused without defeating the household’s main objective?
A list of individual appliances does not show how the household will use them together. The planning worksheet should therefore include a few simultaneous-use scenarios.
These scenarios give the designer something concrete to evaluate. They also help distinguish “whole-home backup” as a broad preference from the specific loads and operating choices that must be verified for the home.
Ask Solar Mike supports Tesla solar and Powerwall 3 designs for homes with 200A and 400A main service panels, but the backup architecture and whether a home uses whole-home or essential-load backup are confirmed at site verification and engineering .
Utility service in south Utah County varies by address: Payson, Spanish Fork, and Salem operate city power in parts of town, SESD serves other areas, and some locations are served by Rocky Mountain Power . Ask Solar Mike confirms the serving utility as the first project step .
The utility check should be kept separate from the household load worksheet. The worksheet defines what the household wants from backup. Site verification, utility requirements, existing electrical equipment, and engineering determine how that objective can be implemented.
Ask Solar Mike serves homeowners throughout Utah . The company handles design, contracting, permitting coordination, and project management; installation is performed by licensed, insured crews under its Utah contractor license . The applicable Utah DOPL license is #14015846-5501 .
Compare proposals against the written priority list rather than comparing battery labels alone. Ask each proposal to identify:
For equipment-level context, read the Tesla Powerwall 3, Enphase, and EG4 comparison. If budget is part of the decision sequence, use the Utah Tesla solar and Powerwall cost guide. Save or share this household backup-planning guide while assembling the inventory.
Ask Solar Mike customers receive a commissioning receipt, system registration proof, Tesla app monitoring handoff, a homeowner ownership record, a named service-escalation path, and written change-order control .
Keep those records with the household priority list and any medical-device instructions. If equipment or household needs change, the written list provides a clear starting point for a new review.
That cannot be determined from the appliance names alone. The answer depends on the specific equipment, electrical information, simultaneous-use plan, existing service equipment, and site engineering. Begin with the inventory and priority worksheet rather than assuming a universal battery count.
Follow the equipment manufacturer’s instructions and guidance from the appropriate care provider. Record the device’s required use, its approved backup procedure, and the household’s emergency plan. Do not treat a whole-home battery as a substitute for device-specific safety planning.
Use “whole-home backup” as the beginning of a design discussion, not as a substitute for a load plan. Identify the combinations that matter to the household and have them evaluated during site verification and engineering.
Yes. Ask Solar Mike designs for 200A and 400A service panels, while the final backup architecture is confirmed through site verification and engineering .
Bring the completed household priority list to a Tesla backup design consultation, or ask Sarah in the site chat to help organize the loads you want reviewed. Ask Solar Mike is a Utah Tesla solar and Powerwall 3 specialist focused on correctly sized backup for larger homes .

Your Gateway to Global Adventures Await Here.
Home
About Us
Services
Testimonials
FAQ's
Blog
Location: 955 S HOMESTEAD DR, WOODLAND HLS UT 84653
Phone: (385) 312-0904
Email: [email protected]